Hummel Croton Inc.
10 Harmich Road
South Plainfield, NJ 07080

Tel:908-754-1800 / Fax 908-754-1815

 
 
Rev. 4-15-2007   Printable Version
MSDS Sheet



COPPER POWDER

    
TYPICAL CHEMICAL ANALYSIS
 
Product Code:   03-2400
Copper:   99.0% Min.
Iron:   0.05%
Lead:   0.01%
Apparent Density g/cm3:   4.5-5.5
Retained 200 Mesh Sieve:   1% Max.
Retained 325 Mesh Sieve:   5% Max.
 
OTHER SPECIFICATIONS:  JAN-C-768
 
PACKAGING:   Metal Pails
 
USES:   Copper Powder is used to manufacture other metal alloys, other copper salts and has uses in pyrotechnic applications.
 
HANDLING:   Avoid breathing dust. Avoid getting in eyes or on skin. Wash thoroughly after handling. Store in a dry place away from direct sunlight, heat and incompatible materials. Reseal containers immediately after use. Store away from food and beverages. OSHA PEL and ACGIH TLV-TWA have been established at 1mg/m3. See MSDS for additional information.
 
PROPER SHIPPING NAME:   Copper Powder
& SHIPPING INFORMATION:   UN# N/A, Class: N/A
 
PRODUCT INFORMATION

Copper Powder
 
CAS Number
RTECS Number
Melting point
Specific Gravity

7440-50-8
GL 5325000
1083 °C
8.94

EINEC Number
Molecular Wt.
Molecular Formula
Water Solubility

2311596
63.546
Cu
Insoluble
 

No warranty, expressed or implied, or merchantability, fitness for a particular purpose or otherwise is made, except that the products herein discussed comply with the chemical description on the labels. Buyer assumes risks of the use, storage and handling. Hummel shall not be liable for any incidental or consequential damages arising directly or indirectly in connection with the purchase, use, storage or handling of this product. The information contained herein is, to the best of our knowledge, true and accurate. However, all recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. We disclaim any liability incurred in connection with the use of these data or suggestions. This information is not to be taken as a license to operate under, or a recommendation to infringe any patent(s). The observance of all regulations and patents is the responsibility of the user. No agent, representative or employee of this company is authorized to vary any terms of this notice.