Hummel Croton Inc.
10 Harmich Road
South Plainfield, NJ 07080

Tel:908-754-1800 / Fax 908-754-1815

 
 
Rev. 4-15-2007   Printable Version
MSDS Sheet



IRON POWDER CAST

    
TYPICAL CHEMICAL ANALYSIS
 
Product Code:   09-4490
Metallic Iron:   90%
Total Carbon:   2.85%
Manganese:   <1.0%
Silicon:   <3.0%
Chromium:   <1.0%
Granulation    
Passing 20 mesh:   95-100%
Passing 100 mesh:   1% Max.
 
OTHER SPECIFICATIONS:  N/A
 
PACKAGING:   100 lb. Bags
 
USES:   Cast iron powder is used in the manufacturing of specialty alloys and as an ingredient in pyrotechnic mixtures.
 
HANDLING:   Avoid breathing dust. Avoid getting in eyes or on skin. Wash thoroughly after handling. Store in a dry place away from direct sunlight, heat and incompatible materials. Reseal containers immediately after use. Store away from food and beverages. Since no exposure limit has been established by OSHA and ACGIH, we recommend that our product be treated as a nuisance dust 15mg/m3. See MSDS for additional information.
 
PROPER SHIPPING NAME:   Iron Powder Cast
& SHIPPING INFORMATION:   UN# N/A, Class N/A
 
PRODUCT INFORMATION

Iron Powder Cast
 
CAS Number
RTECS Number
Melting point
Specific Gravity

7439-89-6
NO 4565500
1535 °C
7.87

EINEC Number
Molecular Wt.
Molecular Formula
Water Solubility

2310964
55.85
Fe
Insoluble
 

No warranty, expressed or implied, or merchantability, fitness for a particular purpose or otherwise is made, except that the products herein discussed comply with the chemical description on the labels. Buyer assumes risks of the use, storage and handling. Hummel shall not be liable for any incidental or consequential damages arising directly or indirectly in connection with the purchase, use, storage or handling of this product. The information contained herein is, to the best of our knowledge, true and accurate. However, all recommendations or suggestions are made without guarantee, since the conditions of use are beyond our control. We disclaim any liability incurred in connection with the use of these data or suggestions. This information is not to be taken as a license to operate under, or a recommendation to infringe any patent(s). The observance of all regulations and patents is the responsibility of the user. No agent, representative or employee of this company is authorized to vary any terms of this notice.